4 EASY STEPS TO TOTAL FLOOR CARE |
| KIND OF FLOOR |
WOOD, MARBLE, LINOLEUM |
| Step
1 CLEAN |
Neutral
Cleaner
-Dilute
the General Purpose/Neutral Cleaner in the tank following the instructions on the
bottle.
-Use the floor buffer with tan
cleaning pads.
-If the floor is very dirty use the green
scrubbing pads.
-Mop and let dry.
-Follow with step 2. |
| Step
2 |
Polish
-Use
the floor buffer with dry tan pads on dry scrubbing
brushes.
-Continue with step 3. |
| Step
3 |
Buff
-Apply
two coats of the High Gloss Protective/Acrylic Floor Finish.
-Between waxings use the floor buffer with lambswool pads to maintain a high gloss finish. |
| Step
4 TOUCH UPS |
Touch
ups
-To
remove scuff marks from the floor's finish use the floor buffer with dry tan pads.
-If the floor is very dirty, use the floor buffers as described in step 1. |
| KIND OF FLOOR |
CARPETING & RUGS |
| Step
1 CLEAN |
Shampoo
-Dilute Dry Foam Carpet Shampoo in the machine tank following the instructions on the bottle.
-Use the floor buffers with soft white bristle carpet brushes.
-Use the trigger mechanism to dispense the right amount of shampoo sparingly until you see a white foam on the carpet.
-Guide the floor polisher with forward and backward movements. |
| Step 2 |
Let Dry
-After shampooing let dry, 3-4 hours, preferably over night. |
| Step 3 |
Vacuum
-Vacuum crystallized dirt debris.
|
| Step 4 TOUCH UPS |
Touch ups
-Use the floor polisher with the Dry Foam Carpet Shampoo to remove spots and maintain high traffic areas without the need to shampoo the entire carpet.
-If you have heavy grease based stains use the Koblenz floor buffers with the Heavy Duty Cleaner.
Follow with the Dry Foam Rug Shampoo. |
| KIND OF FLOOR |
CERAMIC TILE, GROUT, VINYL & CONCRETE |
| Step 1 CLEAN |
Heavy Duty Cleaner*
-Dilute the Heavy Duty Cleaner in the tank of the floor polisher following the instructions on the bottle.
-Use the floor polisher with the natural bristle brushes or green scrubbing pads.
-Mop and let dry.
-Continue with step 2. |
| Step 2 |
Polish
-Use the floor polisher with dry tan pads to obtain a high gloss shine follow with step 3. |
| Step 3 |
Buff
-Apply two coats of High Gloss Protective/Acrylic Floor Finish with a sponge. Buff with felt pads.
-Between waxings use the floor polisher with felt buffing pads to renew the shine. |
| Step 4 TOUCH UPS |
Touch ups
-To remove scuff marks, use the floor polisher with dry tan pads, these will remove marks without dulling the finish.
-If the floor is very dirty, use the floor buffer as described in step 1. |
| *NOTE: Scrubbing brushes are recommended for textured surfaces and grout, green pads are recommended for smooth surfaces. |
